第十五章 Linux核心数据结构
本章列出了Linux实用的主要数据结构。
block_dev_strUCt
此结构用于向核心登记块设备，它还被buffer
cache实用。所有此类结构都位于blk_dev数组中。
struct blk_dev_struct {
void (*request_fn)(void);
struct request * current_request;
struct request plug;
struct tq_struct plug_tq;
};
buffer_head
此结构包含关于buffer cache中一块缓存的信息。
/* bh state bits */
#define BH_Uptodate 0 /* 1 if the buffer contains valid data */
#define BH_Dirty 1 /* 1 if the buffer is dirty */
#define BH_Lock 2 /* 1 if the buffer is locked */
#define BH_Req 3 /* 0 if the buffer has been invalidated */
#define BH_Touched 4 /* 1 if the buffer has been touched (aging) */
#define BH_Has_aged 5 /* 1 if the buffer has been aged (aging) */
#define BH_Protected 6 /* 1 if the buffer is protected */
#define BH_FreeOnIO 7 /* 1 to discard the buffer_head after IO */
struct buffer_head {
/* First cache line: */
unsigned long b_blocknr; /* block number */
kdev_t b_dev; /* device (B_FREE = free) */
kdev_t b_rdev; /* Real device */
unsigned long b_rsector; /* Real buffer location on disk */
struct buffer_head *b_next; /* Hash queue list */
struct buffer_head *b_this_page; /* circular list of buffers in one
page */
/* Second cache line: */
unsigned long b_state; /* buffer state bitmap (above) */
struct buffer_head *b_next_free;
unsigned int b_count; /* users using this block */
unsigned long b_size; /* block size */
/* Non-performance-critical data follows. */
char *b_data; /* pointer to data block */
unsigned int b_list; /* List that this buffer appears */
unsigned long b_flushtime; /* Time when this (dirty) buffer
* should be written */
unsigned long b_lru_time; /* Time when this buffer was
* last used. */
struct wait_queue *b_wait;
struct buffer_head *b_prev; /* doubly linked hash list */
struct buffer_head *b_prev_free; /* doubly linked list of buffers */
struct buffer_head *b_reqnext; /* request queue */
};
device
系统中每个网络设备都用一个设备数据结构来表示。
struct device
{
/*
* This is the first field of the "visible" part of this structure
* (i.e. as seen by users in the "Space.c" file). It is the name
* the interface.
*/
char *name;
/* I/O specific fields */
unsigned long rmem_end; /* shmem "recv" end */
[1] [2] [3] 下一页
unsigned long rmem_start; /* shmem "recv" start */
unsigned long mem_end; /* shared mem end */
unsigned long mem_start; /* shared mem start */
unsigned long base_addr; /* device I/O address */
unsigned char irq; /* device IRQ number */
/* Low-level status flags. */
volatile unsigned char start, /* start an operation */
interrupt; /* interrupt arrived */
unsigned long tbusy; /* transmitter busy */
struct device *next;
/* The device initialization function. Called only once. */
int (*init)(struct device *dev);
/* Some hardware also needs these fields, but they are not part of
the usual set specified in Space.c. */
unsigned char if_port; /* Selectable AUI,TP, */
unsigned char dma; /* DMA channel */
struct enet_statistics* (*get_stats)(struct device *dev);
/*
* This marks the end of the "visible" part of the structure. All
* fields hereafter are internal to the system, and may change at
* will (read: may be cleaned up at will).
*/
/* These may be needed for future network-power-down code. */
unsigned long trans_start; /* Time (jiffies) of
last transmit */
unsigned long last_rx; /* Time of last Rx */
unsigned short flags; /* interface flags (BSD)*/
unsigned short family; /* address family ID */
unsigned short metric; /* routing metric */
unsigned short mtu; /* MTU value */
unsigned short type; /* hardware type */
unsigned short hard_header_len; /* hardware hdr len */
void *priv; /* private data */
/* Interface address info. */
unsigned char broadcast[MAX_ADDR_LEN];
unsigned char pad;
unsigned char dev_addr[MAX_ADDR_LEN];
unsigned char addr_len; /* hardware addr len */
unsigned long pa_addr; /* protocol address */
unsigned long pa_brdaddr; /* protocol broadcast addr*/
unsigned long pa_dstaddr; /* protocol P-P other addr*/
unsigned long pa_mask; /* protocol netmask */
unsigned short pa_alen; /* protocol address len */
struct dev_mc_list *mc_list; /* Mcast mac addrs */
int mc_count; /* No installed mcasts */
struct ip_mc_list *ip_mc_list; /* IP mcast filter chain */
__u32 tx_queue_len; /* Max frames per queue */
/* For load balancing driver pair support */
unsigned long pkt_queue; /* Packets queued */
struct device *slave; /* Slave device */
struct net_alias_info *alias_info; /* main dev alias info */
struct net_alias *my_alias; /* alias devs */
/* Pointer to the interface buffers. */
struct sk_buff_head buffs[DEV_NUMBUFFS];
/* Pointers to interface service routines. */
int (*open)(struct device *dev);
int (*stop)(struct device *dev);
上一页 [1] [2] [3] 下一页
int (*hard_start_xmit) (struct sk_buff *skb,
struct device *dev);
int (*hard_header) (struct sk_buff *skb,
struct device *dev,
unsigned short type,
void *daddr,
void *saddr,
unsigned len);
int (*rebuild_header)(void *eth,
struct device *dev,
unsigned long raddr,
struct sk_buff *skb);
void (*set_multicast_list)(struct device *dev);
int (*set_mac_address)(struct device *dev,
void *addr);
int (*do_ioctl)(struct device *dev,
struct ifreq *ifr,
int cmd);
int (*set_config)(struct device *dev,
struct ifmap *map);
void (*header_cache_bind)(struct hh_cache **hhp,
struct device *dev,
unsigned short htype,
__u32 daddr);
void (*header_cache_update)(struct hh_cache *hh,
struct device *dev,
unsigned char * haddr);
int (*change_mtu)(struct device *dev,
int new_mtu);
struct iw_statistics* (*get_wireless_stats)(struct device *dev);
};
device_struct
此结构被块设备和字符设备用来向核心登记（包含设备名称以及可对此设备进行的
文件操作）。chrdevs和blkdevs中的每个有效分别表示一个字符设备和块设备。
struct device_struct {
const char * name;
struct file_operations * fops;
};
file
每个打开的文件、套接口都用此结构表示。
struct file {
mode_t f_mode;
loff_t f_pos;
unsigned short f_flags;
unsigned short f_count;
unsigned long f_reada, f_ramax, f_raend, f_ralen, f_rawin;
struct file *f_next, *f_prev;
int f_owner; /* pid or -pgrp where SIGIO should be sent */
struct inode * f_inode;
struct file_operations * f_op;
unsigned long f_version;
void *private_data; /* needed for tty driver, and maybe others */
};
files_struct
描叙被某进程打开的所有文件。
struct files_struct {
int count;
fd_set close_on_exec;
fd_set open_fds;
struct file * fd[NR_OPEN];
};
fs_struct
struct fs_struct {
int count;
unsigned short umask;
struct inode * root, * pwd;
};
gendisk
包含关于某个硬盘的信息。用于磁盘初始化
（出处：http://www.sheup.com）
上一页 [1] [2] [3]
unsigned short f_flags;
unsigned short f_count;
unsigned long f_reada, f_ramax, f_raend, f_ralen, f_rawin;
struct file *f_next, *f_prev;
int f_owner; /* pid or -pgrp where SIGIO should be sent */
struct inode * f_inode;
struct file_operations * f_op;
unsigned long f_version;
void *private_data; /* needed for tty driver, and maybe others */
};
files_struct
描叙被某进程打开的所有文件。
struct files_struct {
int count;
fd_set close_on_exec;
fd_set open_fds;
struct file * fd[NR_OPEN];
};
fs_struct
struct fs_struct {
int count;
unsigned short umask;
struct inode * root, * pwd;
};
gendisk
包含关于某个硬盘的信息。用于磁盘初始化
（出处：http://www.sheup.com）
上一页 [1] [2] [3] [4]
fd_set open_fds;
struct file * fd[NR_OPEN];
};
fs_struct
struct fs_struct {
int count;
unsigned short umask;
struct inode * root, * pwd;
};
gendisk
包含关于某个硬盘的信息。用于磁盘初始化
（出处：http://www.sheup.com/）
上一页 [1] [2] [3] [4] [5]