Install Oracle 8.0.5 for Linux on FreeBSD 3.1, step by step [email protected], Mon Feb 22 18:22:27 CET 1999 Part 0 (damn, those romans knew no zero): IntrodUCtion ------------------------------------------------------ This guide describes how to install Oracle 8.0.5 for Linux on FreeBSD 3.1. Open issues: - compiling perl DBD/DBI interface - re-linking the Oracle database (done by orainst) Other quite interesting informations can be found at: - http://www.freebsd.org.ru/linux-oracle.HOW-TO.Html, thanks to [email protected] for this pointer http://www.wi.leidenuniv.nl/~mhmoolen/ seems to be the original source for this. - http://www.solik.net/oracle_letter.html some hints on Oracle/SCO for FreeBSD (some parts russian, *sigh*) - FTP://ftp.oracle.com/pub/www/oracle8/linux/805ship.tgz As SCO/Oracle is available from ftp.oracle.com as well, this might be an interesting way. Disk space requirements: approx. 1 GB disk space for light usage. For testing purposes, approx. 820 MB seem to be sufficient. Q: Why so much diskspace ? A: Oracle needs a copy of the tape/cd-rom somewhere read-writeable in the filesystem (so-called staging area). This needs approx. 400 MB. We assume the following environment variables: eXPort ORACLE_OWNER=oracle The userid that owns the binaries and the datasets. export ORACLE_SID=WHATEVER Some sort of uniq database name. Given this, you can have multiple databases on the same machine. export ORACLE_HOME=/usr/local/oracle Where the binaries are located. There's a suggestion from Oracle on filesystem layout called "Optimal Flexible Architecture" (OFA). OFA is described in detail in Chapter 1 of the Oracle8 Administrator's Reference for LINUX. export ORACLE_TERM=xterm The terminal type we need to run the installation script. The installation script (orainst), runs on curses. Your mileage may vary. [comment: setting "stty intr '^c' erase '^?'" in your .profile might be useful, as well. orainst is picky on the erase character] You can add those variables to your .bashrc (for every account that will work with oracle!). Add /usr/local/oracle/bin to your $PATH, if you do not want to type the whole path 8-) Part I: How to install all this ? --------------------------------- - Install FreeBSD 3.1 on a new machine, including the ports collection - provide approx 1 GB of diskspace in the filesystem where Oracle will reside (approx. 500 MB for the installation, more if you need a copy of oracle (approx. 400 MB) in the staging area) As root: - Edit /etc/rc.conf and add: linux_enable="YES" ibcs2_enable="YES" - Kernel configuration, add those parameters: o section for shared memory: options SHMALL=4097 options SHMMAXPGS=4097 options "SHMMAX=(SHMMAXPGS*PAGE_SIZE+1)" o section for semaphores (values work, oracle needs approx. 100 semaphores) I do not understand the criterias for "correct" values here. They just have to be large enough options SEMMAP=255 options SEMMNI=235 options SEMMNS=255 options SEMMNU=235 options SEMMSL=255 options SEMOPM=201 options SEMUME=201 - compile the kernel, reboot - Install the linux emu umask 022 cd /usr/ports/emulators/linux make all install - Add a unix group "dba" to /etc/group, like this: dba:*:82:oracle - Add a unix user "oracle" to /etc/passwd, like this: oracle:somepassWord:82:82::0:0:Oracle Owner:/home/oracle:/bin/bash - create the oracle destination Directory mkdir -p /usr/local/oracle/etc echo WHATEVER:/usr/local/oracle:Y >/usr/local/oracle/etc/oratab ln -s /usr/local/oracle/etc/oratab /etc/oratab chown -R oracle.dba /usr/local/oracle - get yourself the large tar file, e.g. ftp://ftp.oracle.com/pub/www/oracle8/linux/805ship.tgz - now continue as user oracle (not root) - unpack the distribution mkdir ~/somedir cd ~/somedir tar xfvz somewhereelse/805ship.tgz - start the orainst script cd ~/somedir/orainst ./orainst - Now some comments on the following "dirty" part. orainst tries to re-link the applications, even while the tgz files provides all of them in (working) binary form. I do not know whether the installation is incomplete if the linking phase fails, so at the end is an appendix on how to get over the linking. See the appendix for details. Otherwise, you probably can work with installating, ignoring the linking errors and copy the pre-linked binaries into place. See below for details. - First, we have to answer quite a few questions to orainst: step through orainst, using OK or the selection given below: o Custom Install (otherwise no 8bit character sets) o Install, Upgrade or De-Install Software o Install New Product - Do not Create DB Objects o Mount point: /usr/local/oracle o ORACLE_HOME location "/usr/local/oracle/app/oracle/product/": 8.0.5 o Environment Variables: * ORACLE_BASE: /usr/local/oracle * ORACLE_HOME: /usr/local/oracle o Install Log: just keep the values o Install from: Staging Area (I had errors when I ran from the CD mount) o Enter Pathname of source staging: Enter the path to ~/somedir, in my case: /usr/local/users/support/oracle/src o Select native language: All Languages o Select all sw-products im Software Asset Manager o select group to act as DBA: dba o select the OSOPER Group: dba o Choose JDBC Components: select all o Pathname for ORACLE_DOC: /usr/local/oracle/doc o Formats of Dokumentation: html - now orainst starts to copy lots of files around. sometimes it will complain about software not being linked or some make command that failed. Ignore those. - After it installed all files, it will return you to the Software Asset Manager. Leave it. It will complain that some commands fail. Ignore this (untested). At the end, it should have created an $ORACLE_HOME/orainst/root.sh - Copy the pre-compiled binaries from somedir/bin: cp ~/somedir/bin/* $ORACLE_HOME/bin/ - Fix orainst/root.sh: 1c1 < #!/usr/bin/sh --- > #!/bin/bash 34c34 < CHOWN=/bin/chown --- > CHOWN=/usr/sbin/chown - as root: run orainst/root.sh It will ask for a pathname to a local bin directory. I used "/usr/local/oracle/bin", $ORACLE_HOME/bin This will set some permissions (sbits for some binaries) Not yet checked in all detail: which ones and for what. - You now have a working oracle setup. Part II: How to get to the first "select" ? ------------------------------------------- Some steps to a running database: cp dbs/init.ora dbs/initWHATEVER.ora edit initWHATEVER.ora, replace DEFAULT with WHATEVER bin/svrmgrl # some prompt from svrmgrl comes up connect internal startup create database WHATEVER character set WE8ISO8859P1; alter tablespace SYSTEM add datafile '/usr/local/oracle/dbs/dbs2WHATEVER.dbf' size 10M autoextend on; @$ORACLE_HOME/rdbms/admin/catalog.sql # lots of messages, some errors @$ORACLE_HOME/rdbms/admin/catproc.sql # ignore those @$ORACLE_HOME/sqlplus/admin/pupbld.sql quit Now you should be able to: sqlplus sys/manager # connects you to the database select * from tab; # which tables are available ? quit # and goodbye Appendix: Getting Oracle to link -------------------------------- This is really, really ugly. But it works for me. It does not produce running binaries, but it lets orainst end with "Result: sucess". During orainst, the installation will report problems seven times: - TNS Listener (this one can be ignored) - Oracle Names - wrap executable - Oracle Trace - Oracle8 Standard RDBMS - Oracle Intelligent Agent - SQL*Plus For these to suceed, some changes have to be made to some files, and the relevant command has to be used (manually). Oracle Names: - edit lib/sysliblist replace "-lnsl -lm" with: "/compat/linux/lib/ld-linux.so.2 /compat/linux/lib/libm.so.6 /compat/linux/lib/libdl.so.2
[1] [2] [3] 下一页
/compat/linux/lib/libpthread.so.0 /compat/linux/lib/libc.so.6 /compat/linux/lib/libnsl.so.1" - edit network/lib/env_network.mk 150c150,151 < EXSYSLIBS= -ldl --- > # EXSYSLIBS= -ldl > EXSYSLIBS= 223c224,225 < EXSYSLIBS=-ldl --- > # EXSYSLIBS=-ldl > EXSYSLIBS= 632c634,635 < MY_TMP_FLAGS = -ldl -lc --- > # MY_TMP_FLAGS = -ldl -lc > MY_TMP_FLAGS = - run make -f ins_network.mk names_targs wrap executable: - set the value of the lib/sysliblist as described before (apparently, it was overwritten by something ? dunno) - edit plsql/lib/env_plsql.mk 149c149,150 < EXSYSLIBS= -ldl --- > # EXSYSLIBS= -ldl > EXSYSLIBS= 222c223,224 < EXSYSLIBS=-ldl --- > # EXSYSLIBS=-ldl > EXSYSLIBS= - run make -f ins_plsql.mk install Oracle Trace: - edit otrace/lib/env_otrace.mk 149c149,150 < EXSYSLIBS= -ldl --- > # EXSYSLIBS= -ldl > EXSYSLIBS= 222c223,224 < EXSYSLIBS=-ldl --- > # EXSYSLIBS=-ldl > EXSYSLIBS= - run make -f /usr/local/oracle/otrace/lib/ins_otrace.mk install Oracle8 Standard RDBMS: - edit rdbms/lib/env_rdbms.mk 149c149,150 < EXSYSLIBS= -ldl --- > # EXSYSLIBS= -ldl > EXSYSLIBS= 222c223,224 < EXSYSLIBS=-ldl --- > # EXSYSLIBS=-ldl > EXSYSLIBS= 680c682,684 < LDLIBS+=-ldl $(NETLIBS) $(NETLIBS) $(NETLIBS) $(NETLIBS) $(NETLIBS) --- > #LDLIBS+=-ldl $(NETLIBS) $(NETLIBS) $(NETLIBS) $(NETLIBS) $(NETLIBS) > # $(LLIBSQL) $(LLIBSQL) > LDLIBS+=$(NETLIBS) $(NETLIBS) $(NETLIBS) $(NETLIBS) $(NETLIBS) - run make -f ins_rdbms.mk install Oracle Intelligent Agent: - edit network/lib/env_oemagent.mk 149c149,150 < EXSYSLIBS= -ldl --- > # EXSYSLIBS= -ldl > EXSYSLIBS= 222c223,224 < EXSYSLIBS=-ldl --- > # EXSYSLIBS=-ldl > EXSYSLIBS= 477,478c479,482 < LIBTCL = /usr/lib/libtcl.so < LLIBTCL = -ltcl --- > #LIBTCL = /usr/lib/libtcl.so > #LLIBTCL = -ltcl > LIBTCL = /client/lib/libtcl.a > LLIBTCL = /client/lib/libtcl.a - compile tcl with a static library you can get tcl from ftp://ftp.scriptics.com/pub/tcl/tcl8_0/tcl8.0.4.tar.gz cd /tmp/ tar xfvz tcl8* cd tcl*4 ./configure make cp libtcl.a /client/lib/ # that's where I keep it - edit network/lib/ins_oemagent.mk 27c27,28 < MY_TMP_FLAGS =-lm -ldl -lc -lcrypt --- > # MY_TMP_FLAGS =-lm -ldl -lc -lcrypt > MY_TMP_FLAGS =-lcrypt - run make -f ins_oemagent.mk install SQL*Plus: - edit sqlplus/lib/env_sqlplus.mk 150c150,151 < EXSYSLIBS= -ldl --- > # EXSYSLIBS= -ldl > EXSYSLIBS= 223c224,225 < EXSYSLIBS=-ldl --- > # EXSYSLIBS=-ldl > EXSYSLIBS= - run make -f ins_sqlplus.mk install If you now re-run orainst, it will end with: Result: Success.
上一页 [1] [2] [3] 下一页
（出处：http://www.sheup.com）