1：确定你的内核支持U番 ：SCSI的选项默认就可以 ：USB的选项一定要安装 USB Mass Storage support ：如下： 代码: SCSI support --- SCSI support type (disk, tape, CD-ROM) SCSI disk support (40) Maximum number of SCSI disks that can be loaded as modules < > SCSI tape support < > SCSI OnStream SC-x0 tape support < > SCSI CD-ROM support < > SCSI generic support --- Some SCSI devices (e.g. CD jukebox) support multiple LUNs [*] Enable extra checks in new queueing code [*] Probe all LUNs on each SCSI device [*] Verbose SCSI error reporting (kernel size +=12K) [ ] SCSI logging facility SCSI low-level drivers ---> PCMCIA SCSI adapter support ---> USB Mass Storage support [ ] USB Mass Storage verbose debug [ ] Freecom USB/ATAPI Bridge support [ ] ISD-200 USB/ATA Bridge support [ ] Microtech CompactFlash/SmartMedia support 2：fdisk -l /dev/sda看看有没有sda1列出来 3：如果有， mkdir /mnt/usb mount /dev/sda1 /mnt/usb -t vfat(当然也可能是msdos) 4：其他： ：在/etc/fstab里面加入： [/code]/dev/sda1 /mnt/usb vfat user,noauto,codepage=936,iocharset=cp936,umask=022 0 0[/code] 可以保证任何一个用户都可以mount USB番，并且启动时不加载 ：关于中文，在本站有很多相关的文章，自己编译内核，把CP936编译成为Native Language。
（出处：http://www.sheup.com）