我安装上了，没有感觉到有多大的区别。我把安装过程说一下：
如果用tar包安装，先解包，然后再
#make
要先make那个kerel的包。。然后才是GLX的。安装时，不能在Xwindows下进行，否则不能成功。。
这篇文章或许对新手弟兄有所帮助，系统应该把编译类工具，比如gcc make automake等工具安装上。系统的kernel-source可能得安装。如果您两种方法都不成功。可能是系统少编译类工具。或者是少kernel- source什么的。如果不知道自己的系统少什么。就要升级系统，把所有的东西都安装上。就OK了。。我的话总是这么多。呵。。。可能有的弟兄问，我如何升级系统呢？？就象安装时一样，选[升级]，如果是洋文的界面，应该是update吧。。
准备阶段：
要把安装包驱动包下载到Linux的分区里，如果您下载到了windows的分区里，请先复制到linux的分区里。切记。。。
安装方法之一
我总共说的是两个方法，这两个方法的好处是，能适合不同的系统，不同的版本，不同的内核。我以Redhat 8.0以及9.0为例，来说明如何安装NVIDIA的驱动。
1。下载：总共有两个包
NVIDIA_GLX-1.0-4349.tar.gz
FTP://download.nvidia.com/XFree86/L...1.0-4349.tar.gz
NVIDIA_kernel-1.0-4349.tar.gz
ftp://download.nvidia.com/XFree86/L...1.0-4349.tar.gz
2。解压和安装
[root@linuxsir01 root]# tar zxvf NVIDIA_kernel-1.0-4349.tar.gz
[root@linuxsir01 root]# cd NVIDIA_kernel-1.0-4349
[root@linuxsir01 NVIDIA_kernel-1.0-4349]#make install
[root@linuxsir01 root]# tar zxvf NVIDIA_GLX-1.0-4349.tar.gz
[root@linuxsir01 root]# cd NVIDIA_GLX-1.0-4349
[root@linuxsir01 NVIDIA_GLX-1.0-4349]#make install
完成后，然后更改/etc/X11/XF86Config文件。参看下帖。
这是Redhat 8.0的/etc/X11/XF86Config文件，请以自己的系统文件来更改，不要复制这个文件，因为机器环境不同。比如显示器，鼠 标，键盘等。。只能在你的系统上更改这个文件。仔细看一下，对于新手弟。本帖只做参考。
有些系统可能没有/etc/X11/XF86Config这个文件，比如Mandrake和Redhat 8.0以前的版本；红旗等发行版，我们可以更改/etc/X11/XF86Config-4文件。
具体问题，具体分析。这个文件大体在哪个发行版都差不多。试着改一下就行了。。
如果安装驱动成功了，但不能进入桌面，那就要把这个文件发上来，然后大家才能提供帮助。
# File generated by anaconda.
#
Section "ServerLayout"
#
Identifier "Anaconda Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
RgbPath "/usr/X11R6/lib/X11/rgb"
如果汉化就把路径加在这里，如果不汉化，就不要加了
FontPath "unix/:7100"
[1] [2] 下一页
EndSection
Section "Module"
#Load "type1"
Load "xtt" 如果汉化了，在加上这一句没有汉化就不要加了
#Load "dbe"在这句的前面，要加一个#号
Load "extmod"
Load "fbdevhw"
#Load "dri"在这句的前面，要加一个#号
Load "glx"
Load "record"
#Load "freetype" 如果汉化了，也在这句的前面，要加一个#号；没有用汉化，就不要加＃号了
EndSection
Section "InputDevice"
# Option "AutoRepeat" "500 5"
# when using XQUEUE, comment out the above line, and uncomment the
# following line
# Option "Protocol" "Xqueue"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be oBTained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
#Option "XkbOptions" ""
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "us" #Option "XkbVariant" ""
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 30.0 - 71.0
VertRefresh 50.0 - 160.0
Option "dpms"
EndSection
Section "Device"
# no known options
#BusID
Identifier "NVIDIA GeForce 2 MX (generic)"
Driver "nvidia"在这里，要把nv改成nvidia
VendorName "NVIDIA GeForce 2 MX (generic)"
BoardName "NVIDIA GeForce 2 MX (generic)"
EndSection
Section "Screen"
Identifier "Screen0"
Device "NVIDIA GeForce 2 MX (generic)"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
（出处：http://www.sheup.com）
上一页 [1] [2]
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 30.0 - 71.0
VertRefresh 50.0 - 160.0
Option "dpms"
EndSection
Section "Device"
# no known options
#BusID
Identifier "NVIDIA GeForce 2 MX (generic)"
Driver "nvidia"在这里，要把nv改成nvidia
VendorName "NVIDIA GeForce 2 MX (generic)"
BoardName "NVIDIA GeForce 2 MX (generic)"
EndSection
Section "Screen"
Identifier "Screen0"
Device "NVIDIA GeForce 2 MX (generic)"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
（出处：http://www.sheup.com）
上一页 [1] [2] [3]