当前位置:Linux教程 - Linux综合 - OSS快速安装指南

OSS快速安装指南

  fjxufeng(风过留枫) 译 Quick installation instrUCtions for Open Sound System ===================================================== 快速安装OOS(开放的声卡系统)指南 IMPORTANT! Do not remove any OSS files if you are upgrading from an earlier Open Sound System version. The upgrade procedure requires that all files from the previous Open Sound System installation are in their place. 重要提示:如果你是从更早版本的OOS中升级,一定不要删除任何一个文件。因为升级时需要这些文件呆在原位上。 You should have three files in this Directory: 你可以在这个目录下看到三个文件: INSTALL (this file) INSTALL:安装指南,就是这个文件! oss-install The installation program oss-install:安装主文件 oss.pkg A data file containing the software to be installed. oss.pkg:OSS包含的数据文件 To install the OSS software you should perform the following steps: 安装OSS软件你需完成以下几个步骤: 1) OSS can't be installed if there is a sound driver already loaded. The easiest way to verify this is to execute cat /dev/sndstat. If it prints out information about sound drivers, it means you have some driver installed. 1)如果在你的系统中已经装载了声卡驱动程序,OSS将不能正常安装。你可以执行 cat /dev/sndstat命令检查你的系统中是否已经安装了声卡驱动程序。如果这个命令打印出一些关于声卡的驱动程序信息,就意味着你安装了声卡驱动程序。 a) If you have earlier version of Open Sound System installed you should unload it using "soundoff" before proceeding. However you _DO NOT_ need to remove the existing driver files since the installation automaticly updates (only) the required parts. a)如果你已经安装了早期版本的OSS,你可以使用soundoff 将OSS从你正在运行的系统中unload掉。但你不能将OSS中的已存在的驱动程序文件面面删掉!因为在升级时,需要这些文件。 b) There is a sound driver compiled in the kernel (not as a loadable module). In this case you have to reconfigure and recompile the kernel so that there is no sound driver included. Don't forget to boot with the newly compiled kernel before proceeding. This only affects Linux,FreeBSD, SCO OpenServer, UnixWare and BSD/OS versions of OSS.
[1] [2] [3] 下一页 

b)如果你有一个声卡驱动程序编译在内核中,你就必需重新配置再重新编译内核以确保不包含声卡驱动程序。做完后别忘了用新的内核重新引导系统。这一点针对的是Linux,FreeBSD, SCO OpenServer, UnixWare and BSD/OS版本的OSS软件。 NOTE FOR LINUX USERS: In the event that your sound driver is a loadable kernel module, you should unload the sound module before proceeding with the OSS installation. Execute "rmmod sound" and ensure that the module is not reinstalled during next boot or by kerneld. The easiest way to do this is to remove all "sound.o" files from the subdirectories of /lib/modules. LINUX用户请注意: 如果在你的系统中,内核已装载了驱动程序,你必须unload掉这个声卡模块才能安装OSS,执行rmmod sound,然后确认这个模块不会在重新启动时被装入。一种简单的方法就是直接移去/lib/modules中所有sound.o文件。 2) Execute the installation program (./oss-install). This must be done when logged on as root (don't use "su"). The installation procedure is described below. 2)执行安装程序:./oss-install。要注意的是:执行这个命令必须以root登录,而不能是用su命令进入root!具体安装如下: If you get error "./oss-install: No such file or directory" please verify that you are trying to install proper OSS/Linux installation package. There are different packages available for both the "traditional" libc/libc5 and the new glibc/libc6 version (for example RedHat 5.x, SuSE 6.x and later). 如果你在安装的过程中遇到错误:"./oss-install:No such file or directory",请检查你是否选择了正确的安装包。因为有供不同libary使用的版本。 In Linux it's possible that oss-install complains something like "Error opening terminal: linux". 在LINUX中,可能会出现oss-install提示象:"Error opening terminal:linux"的错误。 This may happen because there are two different versions of the curses library. 这种情况的发展是原因在你的系统中有两个版本的library。 You may also try setting the TERM environment variable to vt100. 你也可以尝试有vt100的终端进行设置。 3) After installation is complete, you can start the driver by executing "soundon". To stop the driver use "soundoff". These files are found in the directory where OSS is installed and in some systems they can be found in /usr/local/bin. When you need to change configuration of the driver, you an do it by executing "soundconf" in the directory where you installed OSS (usually /usr/lib/oss). 3)当安装完成时,你可以执行soundon来启动OSS声卡驱动程序,用soundoff来中止OSS声卡驱动程序。这些文件可以在OSS安装后的目录或/usr/local/bin目录下找到。当你需要改变这个驱动程序的配置时,你可以执行soundconf,这个文件也在你安装OSS的目录下(通常是/usr/lib/oss)。
上一页 [1] [2] [3] 下一页 

Selecting the right OSS/Linux installation package (Linux only) --------------------------------------------------------------- 正确地选择OSS/Linux安装包(仅限Linux) Due to differences between kernel versions there are 8 different OSS/Linux installation packages downloadable from our web site.4 of them are for systems using the traditional libc and the last 4 ones are for new glibc/libc6 library (RedHat 5.x and later, SuSE 6.x and later and probably all Linux 2.2.x based distributiins). 对应不同的内核,OSS共有8种不同的安装包以供下载。其中有四种是用于传统的library,其余四种是用于新的glibc/libc6(RedHat 5.x以后版本,SuSE 6.x以后版本以及绝大部分基于linux 2.2.x核心的发行版本。 Linux 2.0.x This is the "normal" version which should be used together with all kernels between 2.0.0 and 2.0.36 compiled with uniprocessor support (the default case). Linux 2.0.x:标准版本,支持Linux 2.0.0-2.0.36内核(单处理器)。 Linux 2.0.x (SMP) This package is for Linux 2.0.0 to 2.0.36 kernels compiled with SMP support (SMP=1 uncommented in the kernel Makefile). Use this package only if you have compiled the kernel yourself with SMP support (all Linux distributions install the "normal" (non SMP) kernel by default). Linux 2.0.x(SMP):这个包支持Linux 2.0.0-2.0.36内核(多处理器)。 Linux 2.2.x (SMP) Linux 2.2.x (UP) There are two different packages for the latest Linux 2.2.x kernels. You should select the package depending on the way how the kernel is compiled (this has nothing to do with the number of CPUs on your machine). Linux 2.2.x(SMP)、

(出处:http://www.sheup.com)


上一页 [1] [2] [3] 

if you have compiled the kernel yourself with SMP support (all Linux distributions install the "normal" (non SMP) kernel by default). Linux 2.0.x(SMP):这个包支持Linux 2.0.0-2.0.36内核(多处理器)。 Linux 2.2.x (SMP) Linux 2.2.x (UP) There are two different packages for the latest Linux 2.2.x kernels. You should select the package depending on the way how the kernel is compiled (this has nothing to do with the number of CPUs on your machine). Linux 2.2.x(SMP)、

(出处:http://www.sheup.com)


上一页 [1] [2] [3] [4] 

(出处:http://www.sheup.com/)


上一页 [1] [2] [3] [4] [5]