网络配置 - adsl配置

adsl配置
2004-04-23 15:18 pm
来自：Linux文档
现载：Www.8s8s.coM
地址：无名

关于Linux
使用Linux或类似的操作系统的用户，Adsl的连接也很方便，因为无法接触太多种类的操作系统，所以只对Linux作解释。
首先，下载Adsl客户端软件，地址http://www.roaringpenguin.com/pppoe/rp-pppoe-3.3.tar.gz
你也可以到这里http://www.roaringpenguin.com/pppoe/查找更新版本的客户端软件。
安装：
#tar xvfz rp-pppoe-2.6.tar.gz
#cd rp-pppoe-2.6
# ./go ----------------->不要忘了前边那个点
（注意，我使用的是.gz版本，.rpm版本请参考网站上的说明。）
使用ifconfig命令，查看关于你网卡的信息。
不要给网卡指定IP地址。
运行命令：adsl – setup
Welcome to the Roaring Penguin ADSL client setup. First, I will run some checks on your system to make sure the PPPoE client is installed properly... Looks good! Now, please enter some information:
USER NAME
>>> Enter your PPPoE user name (default):
这里输入在电信局申请的adsl的帐号
NTERFACE
>>> Enter the Ethernet interface connected to the ADSL modem For Solaris, this is likely to be something like /dev/hme0. For Linux, it will be ethn, where 'n' is a number.(default eth0):
问你用哪片网卡拨号，默认是第一片eth0就可以了
Do you want the link to come up on demand, or stay up continuously? If you want it to come up on demand, enter the idle time in seconds after which the link should be dropped. If you want the link to stay up permanently, enter 'no' (two letters, lower-case.)
NOTE: Demand-activated links do not interact well with dynamic IP addresses. You may have some problems with demand-activated links.
>>> Enter the demand value (default no):
用缺省的no就可以了。
Please enter the IP address of your ISP's primary DNS server. If your ISP claims that 'the server will provide DNS addresses', enter 'server' (all lower-case) here. If you just press enter, I will assume you know what you are doing and not modify your DNS setup.
>>> Enter the DNS information here:
这里填你ISP的DNS地址，沈阳的用户可以填入server
PASSWORD
>>> Please enter your PPPoE password:
ADSL拨号密码。
然后运行adsl-start，就可以拨通adsl，adsl-stop命令可以断开连接。
这里有一篇英文的Adsl-HowTo文档：http://www.roaringpenguin.com/pppoe/how-to-connect.txt，有兴趣的可以自己看看！