以下为我的jserv.conf 以及 jserv.properties,zone.properties
# cat jserv.conf
######################################################################
#########
# Apache JServ Configuration File
#
######################################################################
#########
# Note: this file should be appended or included into your httpd.conf
# Tell Apache on win32 to load the Apache JServ communication module
#LoadModule jserv_module modules/ApacheModuleJServ.dll
# Tell Apache on Unix to load the Apache JServ communication module
# For shared object builds only!!!
#LoadModule jserv_module /usr/local/apache/jserv/libexec/mod_jserv.so
# Whether Apache must start Apache JServ or not (On=Manual Off=Autosta
rt)
# Syntax: ApJServManual [on/off]
# Default: "Off"
ApJServManual off
# Properties filename for Apache JServ in Automatic Mode.
# In manual mode this directive is ignored
# Syntax: ApJServProperties [filename]
# Default: "./conf/jserv.properties"
ApJServProperties /usr/local/apache/jserv/etc/jserv.properties
# Log file for this module operation relative to Apache root directory
.
# Set the name of the trace/log file. To avoid possible confusion abo
ut
# the location of this file, an absolute pathname is recommended.
#
# This log file is different than the log file that is in the
# jserv.properties file. This is the log file for the C portion of Apa
che
# JServ.
#
# On Unix, this file must have write permissions by the owner of the J
VM
# process. In other words, if you are running Apache JServ in manual m
ode
# and Apache is running as user nobody, then the file must have its
# permissions set so that that user can write to it.
# Syntax: ApJServLogFile [filename]
# Default: "./logs/mod_jserv.log"
# Note: when set to "DISABLED", the log will be redirected to Apache e
rror log
ApJServLogFile /usr/local/apache/logs/mod_jserv.log
# Log Level for this module
# Syntax: ApJServLogLevel [debug|info|notice|warn|error|crit|alert|eme
rg]
# Default: info (unless compiled w/ JSERV_DEBUG, in which case it's
debug)
ApJServLogLevel notice
# Protocol used by this host to connect to Apache JServ
# (see documentation for more details on available protocols)
# Syntax: ApJServDefaultProtocol [name]
# Default: "ajpv12"
ApJServDefaultProtocol ajpv12
# Default host on which Apache JServ is running
# Syntax: ApJServDefaultHost [hostname]
# Default: "localhost"
#ApJServDefaultHost java.apache.org
#ApJServDefaultHost www.snc.siemens.com.cn
# Default port that Apache JServ is listening to
# Syntax: ApJServDefaultPort [number]
# Default: protocol-dependant (for ajpv12 protocol this is "8007")
ApJServDefaultPort 8007
# The amount of time to give to the JVM to start up as well
# as the amount of time to wait to ping the JVM to see if it
# is alive. Slow or heavily loaded machines might want to
# increase this value.
# Default: 10 seconds
# ApJServVMTimeout 10
# Passes parameter and value to specified protocol.
# Syntax: ApJServProtocolParameter [name] [parameter] [value]
# Default: NONE
# Note: Currently no protocols handle this. Introduced for future prot
ocols.
# Apache JServ secret key file relative to Apache root directory.
# Syntax: ApJServSecretKey [filename]
# Default: "./conf/jserv.secret.key"
# Warning: if authentication is DISABLED, everyone on this machine (no
t just
# this module) may connect to your servlet engine and execute servlet
# bypassing web server restrictions. See the documentation for more in
formation
#ApJServSecretKey /usr/local/apache/jserv/etc/jserv.secret.key
ApJServSecretKey DISABLED
# Mount point for Servlet zones
# (see documentation for more information on servlet zones)
# Syntax: ApJServMount [name] [jserv-url]
# Default: NONE
# Note: [name] is the name of the Apache URI path to mount jserv-url o
n
# [jserv-url] is something like "protocol://host:port/zone"
# If protocol, host or port are not specified, the values from
# "ApJServDefaultProtocol", "ApJServDefaultHost" or "ApJServDefaultPo
rt"
# will be used.
# If zone is not specified, the zone name will be the first subdirect
ory of
# the called servlet.
# Example: "ApJServMount /servlets /myServlets"
# if user requests "http://host/servlets/TestServlet"
# the servlet "TestServlet" in zone "myServlets" on default host
# thru default protocol on defaul port will be requested
# Example: "ApJServMount /servlets ajpv12://localhost:8007"
# if user requests "http://host/servlets/myServlets/TestServlet"
# the servlet "TestServlet" in zone "myServlets" will be requested
# Example: "ApJServMount /servlets ajpv12://jserv.mydomain.com:15643/m
yServlets"
# if user requests "http://host/servlets/TestServlet" the servlet
# "TestServlet" in zone "myServlets" on host "jserv.mydomain.com" usi
ng
# "ajpv12" protocol on port "15643" will be executed
ApJServMount /servlets /root
ApJServMount /servlet /root
# Whether inherits base host mount points or not
# Syntax: ApJServMountCopy [on/off]
# Default: "On"
# Note: This directive is meaninful only when virtual hosts are being
used
ApJServMountCopy on
# Executes a servlet passing filename with proper extension in PATH_TR
ANSLATED
# property of servlet request.
# Syntax: ApJServAction [extension] [servlet-uri]
# Defaults: NONE
# Notes: This is used for external tools.
#ApJServAction .jsp /servlets/org.gjt.jsp.JSPServlet
#ApJServAction .gsp /servlets/com.bitmechanic.gsp.GspServlet
#ApJServAction .jhtml /servlets/org.apache.servlet.ssi.SSI
#ApJServAction .xml /servlets/org.apache.cocoon.Cocoon
#ApJServAction .jsp /alph/gnujsp
ApJServAction .jsp /servlets/oracle.jsp.JspServlet
ApJServAction .jhtml /servlets/org.apache.servlet.ssi.SSI
# Enable the Apache JServ status handler with the URL of
# "http://servername/jserv/" (note the trailing slash!)
# Change the "deny" directive to restrict access to this status page.
SetHandler jserv-status
order deny,allow
deny from all
allow from 127.0.0.1
############################## W A R N I N G #########################
#########
# Remember to disable or otherwise protect the execution of the Apache
JServ #
# Status Handler (see right above) on a production environment since t
his may #
# give untrusted users the ability to obtain restricted information on
your #
# servlets and their initialization arguments such as JDBC passwords a
nd #
# other important information. The Apache JServ Status Handler should
be #
# accessible only by system administrators.
#
######################################################################