从代码安装完整的http+ftp+mail的linuxserver
从代码安装完整的http+ftp+mail的linux server
菜鸟花了大约两个月装了一台linux server，包括kernel/apache2/PHP(GD)/MYSQL/qmail(smtp用户认证)/pureftp等，现在贴出来让大家分享，有问题请到http://www.garhee.com/bbs/的linux论坛提问（转贴别删）
1、安装linux和重编译linux内核
先到redhat.com下载linux 7.3, 和kernel.org下载需要的linux kernel版本
为什么选择7.3？因为简单，集成的东西少，我只需要http ftp mysql mail，而且为了发扬diy精神，我全部软件都从源代码安装。
安装linux时，注意不要把不要的东西安装
到kernel.org下载你需要的kernel代码包，我下载的是2.4.20 25在linux7.3上我没有编译通过，不知哪位大侠编译通过的，劳驾到我的论坛http://www.garhee.com/bbs/告诉我一声，谢谢！
进入到linux kernel代码的目录，
更改Makefile文件中的EXTRAVERSION = minikernel，并且把安装时装进去的linux kernel0的源代码的config文件拷贝过来用，在redhat最好使用redhat自己提供的config文件
执行下面的命令：
make menuconfig
make dep
make bzImage
make modules
make modules_install
在make menuconfig时，可以去掉这些没必要的东西：
Plug and Play configuration
Telephony Support
IEEE 1394 (FireWire) support (EXPERIMENTAL)
Amateur Radio support
IrDA (infrared) support
ISDN subsystem
Multimedia devices
Sound
USB support
Bluetooth support
其他的子选项请读者自己斟酌去掉以缩小内核大小，还有记得另存为自己知道的config文件
由于我用的是scsi(aix79xx)硬盘，所以到http://adaptec.com下载了最新版本的驱动aic79xx-2.0.2-source.tar.gz，覆盖了drivers/scsi/aic79xx目录，再编译。
这样，硬盘哗啦哗啦的转了一大段时间后，终于编译完成了，该执行如下步骤：
cp arch/i386/boot/bzImage /boot/vmlinuz-2.4.20minikernel
cp vmlinux /boot/vmlinux-2.4.20minikernel
cp System.map /boot/System.map-2.4.20minikernel
cd /lib/modules
mkinitrd /boot/initrd-2.4.20minikernel.img 2.4.20minikernel
这时候编译好的内核就拷贝到/boot目录下了，更改/boot/grub/grub.conf或/etc/lilo.conf，增加一条启动项目指向编译好的新内核。lilo启动的话还有执行/sbin/lilo -v。重启后就可以选择新内核了。
另外，一定要ntsysv禁用掉telnet，用ssh
参考文章：《浅谈Linux安全》 http://www.phpx.com/index.php?itemid=227
《linux下SSH配合SecureCRT的密匙完美使用方法》 http://www.5ilinux.com/ssh01.html
2、安装apache2
到apache.org下载最新的apache2版本，解压并执行：
./configure --prefix=/server/apache2 --enable-so \
--enable-mods-shared=most
make
make install
参考文章：《apache的静态/动态编译在apache+php+mysql的应用》http://www.5ilinux.com/apache01.html
3、安装mysql
到mysql.com下载，编译命令：
./configure --prefix=/server/mysql
make
make install
在/etc/ld.so.conf增加一行：
/server/mysql/lib/mysql
执行ldconfig
4、安装php+gd+zlib+freetype2+mmcache
freetype2
到http://www.freetype.org/下载最新版本的freetype2，编译命令：
./configure --prefix=/server/freetype2
make
make install
zlib
到http://www.zlib.org/或http://www.gzip.org/zlib/下载最新版本的zlib，编译命令：
./configure --prefix=/server/zlib
make
make install
gd
到http://www.boutell.com/gd/下载最新版本
./configure --prefix=/server/gdlib \
--with-png=/usr \
--with-jpeg=/usr \
--with-freetype=/server/freetype
make
make install
在/etc/ld.so.conf增加一行：
/server/gdlib/lib
执行ldconfig
php
到php.net下载php4，我安装时php5用不了mmcache，新版本不知出来了没有
./configure --prefix=/server/php \
--with-config-file-path=/server/php/etc \
--with-mysql=/server/mysql \
--with-apxs2=/server/apache2/bin/apxs \
--with-gd=/server/gdlib \
--enable-gd-native-ttf \
--enable-gd-imgstrttf \
--with-jpeg-dir=/usr/lib \
--with-png-dir=/usr/lib \
--with-zlib-dir=/server/zlib \
--with-freetype-dir=/server/freetype2
mmcache
到http://turck-mmcache.sourceforge.net下载
export PHP_PREFIX="/server/php"
$PHP_PREFIX/bin/phpize
./configure --enable-mmcache=shared --with-php-config=$PHP_PREFIX/bin/php-config
make
make install
在php.ini文件Dynamic Extensions中增加：
extension="/server/php/lib/php/extensions/mmcache.so"
mmcache.shm_size="16"
mmcache.cache_dir="/tmp/mmcache"
mmcache.enable="1"
mmcache.optimizer="1"
mmcache.check_mtime="1"
mmcache.debug="0"
mmcache.filter=""
mmcache.shm_max="0"
mmcache.shm_ttl="0"
mmcache.shm_prune_period="0"
mmcache.shm_only="0"
mmcache.compress="1"
建目录：
mkdir /tmp/mmcache
chmod 0777 /tmp/mmcache
参考文章：《PHP 利器一箩筐》http://www.phpx.com/index.php?itemid=237
5、安装qmail
到http://www.qmail.org/下载qmail最新版本和ucspi-tcp daemontools
到http://www.inter7.com/下载vpopmail qmailadmin sqwebmail最新版本
qmail
安装文档qmail http://www.lifewithqmail.org/lwq.html#installation-issues
ucspi http://cr.yp.to/ucspi-tcp.html
daemontools http://cr.yp.to/daemontools.html
安装ucspi-tcp：
make
make setup check
安装deamontools：
package/install
mkdir /var/qmail
groupadd nofiles
useradd qmaild -g nofiles -d /var/qmail -s /bin/false
useradd alias -g nofiles -d /var/qmail/alias -s /bin/false
useradd qmaill -g nofiles -d /var/qmail -s /bin/false
useradd qmailp -g nofiles -d /var/qmail -s /bin/false
groupadd qmail
useradd qmailq -g qmail -d /var/qmail -s /bin/false
useradd qmailr -g qmail -d /var/qmail -s /bin/false
useradd qmails -g qmail -d /var/qmail -s /bin/false
make setup check
生成文件/var/qmail/rc
#!/bin/sh
# Using stdout for logging
# Using control/defaultdelivery from qmail-local to deliver message by default
exec env - PATH="/var/qmail/bin:$PATH" \
qmail-start " cat /var/qmail/control/defaultdelivery "
chmod 755 /var/qmail/rc
mkdir /var/log/qmail
echo ./Mailbox >/var/qmail/control/defaultdelivery
生成文件/var/qmail/bin/qmailctl
#!/bin/sh
# description: the qmail MTA
PATH=/var/qmail/bin:/bin:/usr/bin:/usr/local/bin:/usr/local/sbin
export PATH
QMAILDUID=`id -u qmaild`
NOFILESGID=`id -g qmaild`
case "$1" in
start)
echo "Starting qmail"
if svok /service/qmail-send ; then
svc -u /service/qmail-send /service/qmail-send/log
else
echo "qmail-send supervise not running"
fi
if svok /service/qmail-smtpd ; then
svc -u /service/qmail-smtpd /service/qmail-smtpd/log
else
echo "qmail-smtpd supervise not running"
fi
if svok /service/qmail-pop3d ; then
svc -u /service/qmail-pop3d /service/qmail-pop3d/log
else
echo qmail-pop3d supervise not running
fi
if [ -d /var/lock/subsys ]; then
touch /var/lock/subsys/qmail
fi
;;
stop)
echo "Stopping qmail..."
echo " qmail-smtpd"
svc -d /service/qmail-smtpd /service/qmail-smtpd/log
echo " qmail-send"
svc -d /service/qmail-send /service/qmail-send/log
echo " qmail-pop3d"
svc -d /service/qmail-pop3d /service/qmail-pop3d/log
if [ -f /var/lock/subsys/qmail ]; then
rm /var/lock/subsys/qmail
fi
;;
stat)
svstat /service/qmail-send
svstat /service/qmail-send/log
svstat /service/qmail-smtpd
svstat /service/qmail-smtpd/log
svstat /service/qmail-pop3d
svstat /service/qmail-pop3d/log
qmail-qstat
;;
doqueue|alrm|flush)
echo "Flushing timeout table and sending ALRM signal to qmail-send."
/var/qmail/bin/qmail-tcpok
svc -a /service/qmail-send
;;
queue)
qmail-qstat
qmail-qread
;;
reload|hup)
echo "Sending HUP signal to qmail-send."
svc -h /service/qmail-send
;;
pause)
echo "Pausing qmail-send"
svc -p /service/qmail-send
echo "Pausing qmail-smtpd"
svc -p /service/qmail-smtpd
echo "Pausing qmail-pop3d"
svc -p /service/qmail-pop3d
;;
cont)
echo "Continuing qmail-send"
svc -c /service/qmail-send
echo "Continuing qmail-smtpd"
svc -c /service/qmail-smtpd
echo "Continuing qmail-pop3d"
svc -c /service/qmail-pop3d
;;
restart)
echo "Restarting qmail:"
echo "* Stopping qmail-smtpd."
svc -d /service/qmail-smtpd /service/qmail-smtpd/log
echo "* Sending qmail-send SIGTERM and restarting."
svc -t /service/qmail-send /service/qmail-send/log
echo "* Restarting qmail-smtpd."
svc -u /service/qmail-smtpd /service/qmail-smtpd/log
echo "* Restarting qmail-pop3d."
svc -t /service/qmail-pop3d /service/qmail-pop3d/log
;;
cdb)
tcprules /etc/qmail/tcp.smtp.cdb /etc/qmail/tcp.smtp.tmp < /etc/qmail/tcp.smtp
chmod 644 /etc/qmail/tcp.smtp.cdb
echo "Reloaded /etc/qmail/tcp.smtp."
tcprules /etc/qmail/tcp.pop3.cdb /etc/qmail/tcp.pop3.tmp < /etc/qmail/tcp.pop3
chmod 644 /etc/qmail/tcp.smtp.cdb
echo "Reloaded /etc/qmail/tcp.pop3."
;;
help)
cat < stop -- stops mail service (smtp connections refused, nothing goes out)
start -- starts mail service (smtp connection accepted, mail can go out)
pause -- temporarily stops mail service (connections accepted, nothing leaves)
cont -- continues paused mail service
stat -- displays status of mail service
cdb -- rebuild the tcpserver cdb file for smtp
restart -- stops and restarts smtp, sends qmail-send a TERM & restarts it
doqueue -- schedules queued messages for immediate delivery
reload -- sends qmail-send HUP, rereading locals and virtualdomains
queue -- shows status of queue
alrm -- same as doqueue
flush -- same as doqueue
hup -- same as reload
HELP
;;
*)
echo "Usage: $0 "
exit 1
;;
esac
exit 0
mkdir -p /var/qmail/supervise/qmail-send/log
mkdir -p /var/qmail/supervise/qmail-smtpd/log
生成/var/qmail/supervise/qmail-send/run
#!/bin/sh
exec /var/qmail/rc
生成/var/qmail/supervise/qmail-send/log/run
#!/bin/sh
exec /usr/local/bin/setuidgid qmaill /usr/local/bin/multilog t /var/log/qmail
生成/var/qmail/supervise/qmail-smtpd/run
#!/bin/sh
QMAILDUID=`id -u vpopmail`
NOFILESGID=`id -g vpopmail`
MAXSMTPD=`cat /var/qmail/control/concurrencyincoming`
LOCAL=`head -1 /var/qmail/control/me`
if [ -z "$QMAILDUID" -o -z "$NOFILESGID" -o -z "$MAXSMTPD" -o -z "$LOCAL" ]; then
echo QMAILDUID, NOFILESGID, MAXSMTPD, or LOCAL is unset in
echo /var/qmail/supervise/qmail-smtpd/run
exit 1
fi
if [ ! -f /var/qmail/control/rcpthosts ]; then
echo "No /var/qmail/control/rcpthosts!"
echo "Refusing to start SMTP listener because it'll create an open relay"
exit 1
fi
exec /usr/local/bin/softlimit -m 5000000 \
/usr/local/bin/tcpserver -v -R -l "$LOCAL" -x /etc/qmail/tcp.smtp.cdb -c "$MAXSMTPD" \
-u "$QMAILDUID" -g "$NOFILESGID" 0 smtp /var/qmail/bin/qmail-smtpd 2>&1
生成/var/qmail/supervise/qmail-smtpd/log/run
#!/bin/sh
exec /usr/local/bin/setuidgid qmaill /usr/local/bin/multilog t /var/log/qmail/smtpd
生成/var/qmail/supervise/qmail-pop3d/run
#!/bin/sh
QMAILDUID=`id -u vpopmail`
NOFILESGID=`id -g vpopmail`
LOCAL=`head -1 /var/qmail/control/me`
if [ -z "$QMAILDUID" -o -z "$NOFILESGID" -o -z "$LOCAL" ]; then
echo QMAILDUID, NOFILESGID, or LOCAL is unset in
echo /var/qmail/supervise/qmail-pop3d/run
exit 1
fi
exec /usr/local/bin/softlimit -m 5000000 \
/usr/local/bin/tcpserver -R -H -x /etc/qmail/tcp.pop3.cdb \
-u "$QMAILDUID" -g "$NOFILESGID" 0 110 /var/qmail/bin/qmail-popup \
"$LOCAL" /server/vpopmail/bin/vchkpw /var/qmail/bin/qmail-pop3d Maildir 2>&1
生成/var/qmail/supervise/qmail-pop3d/log/run
#!/bin/sh
exec /usr/local/bin/setuidgid qmaill /usr/local/bin/multilog t \
/var/log/qmail/pop3d
echo 20 > /var/qmail/control/concurrencyincoming
chmod 644 /var/qmail/control/concurrencyincoming
chmod 755 /var/qmail/supervise/qmail-send/run
chmod 755 /var/qmail/supervise/qmail-send/log/run
chmod 755 /var/qmail/supervise/qmail-smtpd/run
chmod 755 /var/qmail/supervise/qmail-smtpd/log/run
mkdir -p /var/log/qmail/smtpd
chown qmaill /var/log/qmail /var/log/qmail/smtpd
mkdir -p /var/log/qmail/pop3d
chown qmaill /var/log/qmail /var/log/qmail/pop3d
mkdir /etc/qmail
echo '127.:allow,RELAYCLIENT=""' >>/etc/qmail/tcp.smtp
echo ':allow' >>/etc/qmail/tcp.pop3
qmailctl cdb
vpopmail
groupadd -g 89 vchkpw
useradd -g vchkpw -u 89 vpopmail
用/server/mysql/bin/mysql登录进mysql，建vpopmail数据库
CREATE DATABASE vpopmail;
GRANT select,insert,update,delete,create,drop ON vpopmail.*
TO vpopmailuser@localhost IDENTIFIED BY 'vpoppasswd';
./configure \
--prefix=/server/vpopmail \
--enable-qmaildir=/var/qmail \
--enable-vpopuser=vpopmail \
--enable-vpopgroup=vchkpw \
--enable-roaming-users \
--enable-tcprules-prog=/usr/local/bin/tcprules \
--enable-tcpserver-file=/etc/qmail/tcp.smtp \
--enable-relay-clear-minutes=20 \
--enable-auth-logging \
--enable-mysql-logging \
--enable-clear-passwd \
--disable-sqwebmail-pass \
--enable-log-name=vpopmail \
--enable-incdir=/server/mysql/include/mysql \
--enable-libdir=/server/mysql/lib/mysql \
--enable-libs=mysqlclient \
--enable-auth-module=mysql \
--enable-ip-alias-domains \
--enable-mysql-limits \
--enable-many-domains \
--disable-passwd \
--enable-mysql-limits
make
make install-strip
echo "localhost|0|vpopmailuser|vpoppasswd|vpopmail" > /server/vpopmail/etc/vpopmail.mysql
chown vpopmail.vchkpw /server/vpopmail/etc/vpopmail.mysql
chmod 640 ~vpopmail/etc/vpopmail.mysql
echo 'mydomain.com' >/var/qmail/control/rcpthosts
/var/qmail/bin/vadddomain mydomain.com
qmailadmin
./configure --enable-cgibindir=/server/apache2/cgi-bin \
--enable-htmldir=/server/apache2/htdocs
make
make install
sqwebmail
./configure \
--prefix=/server/sqwebmail \
--with-cachedir=/server/sqwebmail/cachetmp \
--enable-imagedir=/server/apache2/htdocs/webmail \
--enable-cgibindir=/server/apache2/cgi-bin \
--enable-softtimeout=1200 \
--enable-hardtimeout=1800 \
--with-fcgi
make
make install
ln -s /var/qmail/supervise/qmail-send /var/qmail/supervise/qmail-smtpd /var/qmail/supervise/qmail-pop3d /service
启动apache，就可以从qmailadmin用 [email protected] 来登录管理mydomain.com。增加一个email地址[email protected]后，就可以用outlook和[email protected]用户进行收发email了。
其他安装文章：《基于qmail的完整WEBMAIL解决方案安装详解》http://www.phpx.com/index.php?itemid=130
6、smtpd用户认证功能
下载http://www.garhee.com/download/qmail-smtpd.c ;这个是从netqmail-1.05版本更改过来的，如果要改新版本，请对照更改
/var/qmail/bin/qmailctl stop
更改/var/qmail/supervise/qmail-smtpd/run中的
exec /usr/local/bin/softlimit -m 5000000 \
/usr/local/bin/tcpserver -v -R -l "$LOCAL" -x /etc/qmail/tcp.smtp.cdb -c "$MAXSMTPD" \
-u "$QMAILDUID" -g "$NOFILESGID" 0 smtp /var/qmail/bin/qmail-smtpd 2>&1
为
exec /usr/local/bin/softlimit -m 5000000 \
/usr/local/bin/tcpserver -v -H -R -l "$LOCAL" -x /etc/qmail/tcp.smtp.cdb -c "$MAXSMTPD" \
-u "$QMAILDUID" -g "$NOFILESGID" 0 smtp /var/qmail/bin/qmail-smtpd \
/server/vpopmail/bin/vchkpw /bin/true 2>&1
/var/qmail/bin/qmailctl start
7、安装pureftpd
到http://mirrors.sunsite.dk/pure-ftpd/下载(pureftp.org给封掉了)
http://home.9812.net/linux/article/pureftpd/下载安装配置文件
./configure --prefix=/server/pureftp \
--with-boring \
--with-throttling \
--with-ratios \
--with-virtualhosts \
--with-virtualchroot \
--with-peruserlimits \
--with-mysql=/server/mysql \
--with-ftpwho \
--with-language=simplified-chinese \
--without-inetd \
--without-shadow \
--with-diraliases \
--with-sysquotas \
--with-altlog \
--with-quotas \
--with-privsep
make
make install
cp pureftpd-mysql.conf /server/pureftp/etc/
cp configuration-file/pure-ftpd.conf /server/pureftp/etc/
修改两个configure文件直到满意
cp configuration-file/pure-config.pl /server/pureftp/bin/
增加一行/server/pureftp/sbin/pure-ftpd到：
-x && ($PUREFTPD=$_, last) for qw(
$/sbin/pure-ftpd
/usr/local/pure-ftpd/sbin/pure-ftpd
/usr/local/pureftpd/sbin/pure-ftpd
/usr/local/sbin/pure-ftpd
/usr/sbin/pure-ftpd
/server/pureftp/sbin/pure-ftpd
);
useradd ftp -u 1111 -g proftpgroup -s /bin/false -d /bin/null -c "pureftpd user"
登录mysql执行sql语句：
create database pureftp;
GRANT ALL ON pureftp.* TO pureftp@localhost IDENTIFIED BY 'purepasswd';
CREATE TABLE `users` (
`id` int(32) unsigned NOT NULL auto_increment,
`User` varchar(16) NOT NULL default '',
`Password` varchar(64) NOT NULL default '',
`Uid` varchar(11) NOT NULL default '-1',
`Gid` varchar(11) NOT NULL default '-1',
`Dir` varchar(128) NOT NULL default '',
`QuotaSize` smallint(5) NOT NULL default '0',
`QuotaFiles` int(11) NOT NULL default '0',
`ULBandwidth` smallint(5) NOT NULL default '0',
`DLBandwidth` smallint(5) NOT NULL default '0',
`ULRatio` smallint(6) NOT NULL default '0',
`DLRatio` smallint(6) NOT NULL default '0',
`comment` tinytext NOT NULL,
`ipaccess` varchar(15) NOT NULL default '*',
`status` enum('0','1') NOT NULL default '0',
`create_date` datetime NOT NULL default '0000-00-00 00:00:00',
`modify_date` datetime NOT NULL default '0000-00-00 00:00:00',
PRIMARY KEY (`id`,`User`),
UNIQUE KEY `User` (`User`)
) TYPE=MyISAM AUTO_INCREMENT=5 ;
INSERT INTO users VALUES (5, 'test', MD5('test'), '505', '505', '/tmp', 0, 0, 0, 0, 0, 0, '', '*', '1', '2003-06-26 18:04:33', '2003-06-26 18:04:33');
启动pureftpd
/server/pureftp/bin/pure-config.pl /server/pureftp/etc/pure-ftpd.conf
停止pureftpd
kill -INT `cat /var/run/pure-ftpd.pid | sed 1q`
参考文章：《Pure-FTPd + LDAP + MySQL + PGSQL + Virtual-Users + Quota How To》http://www.chinaunix.net/jh/15/102137.html
Continue reading "从代码安装完整的http+ftp+mail的linux server"
================= END ==============================