环境：ultra1 2块硬盘 已经配置rootdg内包含一个slice c0t0d0s5 系统盘上的slice 5 6 7 各有100m空间 其余空间都给了/ 和swap 试验内容为将根盘封装，然后景象。试验景象盘能够引导系统，最后解除景象和封装。 Rootdisk encapsulate 1.add new disk slice at rootdg root@sunlab # vxdctl add disk c0t1d0s5 type=simple vxvm:vxdctl: WARNING: Device c0t1d0s5: Not currently in the configuration root@sunlab # vxdisk -f init c0t1d0s5 type=simple root@sunlab # vxdg adddisk c0t1d0s5 root@sunlab # vxdctl enable vxdisk list DEVICE TYPE DISK GROUP STATUS c0t0d0s2 sliced - - error c0t0d0s5 simple c0t0d0s5 rootdg online c0t1d0s2 sliced - - error c0t1d0s5 simple c0t1d0s5 rootdg online 2.remove rootdisk slice at rootdg root@sunlab # vxdctl rm disk c0t0d0s5 root@sunlab # vxdg -g rootdg rmdisk c0t0d0s5 root@sunlab # vxdisk rm c0t0d0s5 root@sunlab # vxdisk list DEVICE TYPE DISK GROUP STATUS c0t0d0s2 sliced - - error c0t1d0s2 sliced - - error c0t1d0s5 simple c0t1d0s5 rootdg online root@sunlab # vxdiskadm Menu: VolumeManager/Disk 1 Add or initialize one or more disks 2 Encapsulate one or more disks 3 Remove a disk 4 Remove a disk for replacement 5 Replace a failed or removed disk 6 Mirror volumes on a disk 7 Move volumes from a disk 8 Enable Access to (import) a disk group 9 Remove access to (deport) a disk group 10 Enable (online) a disk device 11 Disable (offline) a disk device 12 Mark a disk as a spare for a disk group 13 Turn off the spare flag on a disk 14 Unrelocate subdisks back to a disk 15 Exclude a disk from hot-relocation use 16 Make a disk available for hot-relocation use 17 Prevent multipathing/Suppress devices from VxVM's view 18 Allow multipathing/Unsuppress devices from VxVM's view 19 List currently suppressed/non-multipathed devices 20 Change the disk naming scheme Hit RETURN to continue. 21 Get the newly connected/zoned disks in VxVM view list List disk information ? Display help about menu ?? Display help about the menuing system q Exit from menus Select an operation to perform: 2 Encapsulate one or more disks root@sunlab # vxdisk list DEVICE TYPE DISK GROUP STATUS c0t0d0s2 sliced rootdisk rootdg online c0t1d0s2 sliced - - error c0t1d0s5 simple c0t1d0s5 rootdg online 3.remove disk slice from rootdg root@sunlab # vxdctl rm disk c0t1d0s5 root@sunlab # vxdg -g rootdg rmdisk c0t1d0s5 root@sunlab # vxdisk rm c0t1d0s5 root@sunlab # vxdisk list DEVICE TYPE DISK GROUP STATUS c0t0d0s2 sliced rootdisk rootdg online c0t1d0s2 sliced - - error 4.mirror rootdisk root@sunlab #vxdisksetup ?i c0t1d0s2 root@sunlab #vxdg ?g rootdg adddisk c0t1d0 root@sunlab # vxdiskadm --select option 6 root@sunlab #vxtask list --wait for the process finish root@sunlab # vxdisk list DEVICE TYPE DISK GROUP STATUS c0t0d0s2 sliced rootdisk rootdg online c0t1d0s2 sliced c0t1d0 rootdg online root@sunlab # more /etc/vfstab #device device mount FS fsck mount mount #to mount to fsck point type pass at boot options # #/dev/dsk/c1d0s2 /dev/rdsk/c1d0s2 /usr ufs 1 yes - fd - /dev/fd fd - no - /proc - /proc proc - no - /dev/vx/dsk/swapvol - - swap - no - /dev/vx/dsk/rootvol /dev/vx/rdsk/rootvol / ufs 1 no - swap - /tmp tmpfs - yes - #NOTE: volume rootvol (/) encapsulated partition c0t0d0s0 #NOTE: volume swapvol (swap) encapsulated partition c0t0d0s1 root@sunlab # eeprom -- use-nvramrc devalias use-nvramrc?=true nvramrc=devalias vx-c0t1d0 /sbus@1f,0/espdma@e,8400000/esp@e,8800000/sd@1,0:a devalias vx-rootdisk /sbus@1f,0/espdma@e,8400000/esp@e,8800000/sd@0,0:a root@sunlab # prtconf -pv grep boot --verify the boot disk boot-retained-page: bootargs: 00 bootpath: '/sbus@1f,0/espdma@e,8400000/esp@e,8800000/sd@0,0:a' boot-command: 'boot' auto-boot?: 'false' watchdog-reboot?: 'false' boot-file: boot-device: 'vx-rootdisk' root@sunlab # init 0 OK boot vx-c0t1d0 root@sunlab # prtconf -pv grep boot --verify the boot disk boot-retained-page: bootargs: 00 bootpath: '/sbus@1f,0/espdma@e,8400000/esp@e,8800000/sd@1,0:a' 6.unmirror rootdisk vxdg -g rootdg -k rmdisk c0t1d0 root@sunlab # vXPrint -htg rootdg DG NAME NCONFIG NLOG MINORS GROUP-ID DM NAME DEVICE TYPE PRIVLEN PUBLEN STATE RV NAME RLINK_CNT KSTATE STATE PRIMARY DATAVOLS SRL RL NAME RVG KSTATE STATE REM_HOST REM_DG REM_RLNK V NAME RVG KSTATE STATE LENGTH READPOL PREFPLEX UTYPE PL NAME VOLUME KSTATE STATE LENGTH LAYOUT NCOL/WID MODE SD NAME PLEX DISK DISKOFFS LENGTH [COL/]OFF DEVICE MODE SV NAME PLEX VOLNAME NVOLLAYR LENGTH [COL/]OFF AM/NM MODE DC NAME PARENTVOL LOGVOL SP NAME SNAPVOL DCO dg rootdg default default 0 1075733857.1025.sunlab dm c0t1d0 - - - - REMOVED dm rootdisk c0t0d0s2 sliced 3039 4151120 - v rootdisk5vol - ENABLED ACTIVE 103360 ROUND - gen pl rootdisk5vol-01 rootdisk5vol ENABLED ACTIVE 103360 CONCAT - RW sd rootdisk-05 rootdisk5vol-01 rootdisk 3634319 103360 0 c0t0d0 ENA pl rootdisk5vol-02 rootdisk5vol DISABLED REMOVED 103360 CONCAT - RW sd c0t1d0-01 rootdisk5vol-02 c0t1d0 0 103360 0 - RMOV v rootdisk6vol - ENABLED ACTIVE 205200 ROUND - gen pl rootdisk6vol-01 rootdisk6vol ENABLED ACTIVE 205200 CONCAT - RW sd rootdisk-04 rootdisk6vol-01 rootdisk 3737679 205200 0 c0t0d0 ENA pl rootdisk6vol-02 rootdisk6vol DISABLED REMOVED 205200 CONCAT - RW sd c0t1d0-02 rootdisk6vol-02 c0t1d0 103360 205200 0 - RMOV v rootdisk7vol - ENABLED ACTIVE 205200 ROUND - gen pl rootdisk7vol-01 rootdisk7vol ENABLED ACTIVE 205200 CONCAT - RW sd rootdisk-03 rootdisk7vol-01 rootdisk 3942879 205200 0 c0t0d0 ENA pl rootdisk7vol-02 rootdisk7vol DISABLED REMOVED 205200 CONCAT - RW sd c0t1d0-03 rootdisk7vol-02 c0t1d0 308560 205200 0 - RMOV v rootvol - ENABLED ACTIVE 3336400 ROUND - root pl rootvol-01 rootvol ENABLED ACTIVE 3336400 CONCAT - RW sd rootdisk-B0 rootvol-01 rootdisk 4151119 1 0 c0t0d0 ENA sd rootdisk-02 rootvol-01 rootdisk 0 3336399 1 c0t0d0 ENA pl rootvol-02 rootvol DISABLED REMOVED 3336400 CONCAT - RW sd c0t1d0-04 rootvol-02 c0t1d0 513760 3336400 0 - RMOV v swapvol - ENABLED ACTIVE 297920 ROUND - swap pl swapvol-01 swapvol ENABLED ACTIVE 297920 CONCAT - RW sd rootdisk-01 swapvol-01 rootdisk 3336399 297920 0 c0t0d0 ENA pl swapvol-02 swapvol DISABLED REMOVED 297920 CONCAT - RW sd c0t1d0-05 swapvol-02 c0t1d0 3850160 297920 0 - RMOV root@sunlab # vxplex dis rootdisk6vol-02 rootdisk5vol-02 rootdisk7vol-02 rootvol-02 swapvol-02 root@sunlab # vxedit -r rm rootdisk6vol-02 rootdisk5vol-02 rootdisk7vol-02 rootvol-02 swapvol-02 root@sunlab # vxprint -htg rootdg DG NAME NCONFIG NLOG MINORS GROUP-ID DM NAME DEVICE TYPE PRIVLEN PUBLEN STATE RV NAME RLINK_CNT KSTATE STATE PRIMARY DATAVOLS SRL RL NAME RVG KSTATE STATE REM_HOST REM_DG REM_RLNK V NAME RVG KSTATE STATE LENGTH READPOL PREFPLEX UTYPE PL NAME VOLUME KSTATE STATE LENGTH LAYOUT NCOL/WID MODE
[1] [2] 下一页
（出处：http://www.sheup.com）
上一页 [1] [2]