当前位置:Linux教程 - 网络过滤 - 网络过滤 - cs服务器的地址映射

网络过滤 - cs服务器的地址映射

cs服务器的地址映射
2004-04-23 15:18 pm
来自:Linux文档
现载:Www.8s8s.coM
地址:无名

用iptables做防火墙;iptables的配置文件:
代码:

for this to run iptables firewall
#!/bin/sh
/sbin/modprobe ip_tables
/sbin/modprobe ip_nat_ftp
/sbin/modprobe ip_conntrack_ftp
/sbin/iptables -F
/sbin/iptables -F -t nat
/sbin/iptables -X
/sbin/iptables -Z

echo"1">/proc/sys/net/ipv4/ip_forward
/sbin/iptables -P INPUT ACCEPT
/sbin/iptables -P FORWARD ACCEPT
/sbin/iptables -P OUTPUT ACCEPT

iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE
iptables -A FORWARD -s 0/0 -d 0/0 -j ACCEPT

iptables -t nat -A PREROUTING -d (外网 ip不要端口) -p udp --dport 27015(这个地址无所谓) -j DNAT --to (内网地址不要端口)
iptables -t nat -A POSTROUTING -d (内网地址) -p udp --dport 27015(端口就是内网cs服务器所用的端口启动脚本里面的那个+270xxx哪个) -o eth1 -j SNAT --to (内网网关)
iptables -t nat -A POSTROUTING -s (内网地址) -p udp --dport 27010:27012 -o eth1 -j SNAT --to (内网网关)
iptables -t nat -A POSTROUTING -s (内网地址) -p tcp --dport 5273 -o eth1 -j SNAT --to (内网网关)
iptables -t nat -A POSTROUTING -s (内网地址) -p tcp --dport 7002 -o eth1 -j SNAT --to (内网网关)
iptables -t nat -A POSTROUTING -s (内网地址) -p udp --dport 27010:27012 -o eth0 -j SNAT --to (外网地址)
iptables -t nat -A POSTROUTING -s (内网地址) -p tcp --dport 5273 -o eth0 -j SNAT --to (外网地址)
iptables -t nat -A POSTROUTING -s (内网地址) -p tcp --dport 7002 -o eth0 -j SNAT --to (外网地址)


-p 指定协议(--protocol)
--dport 指明端口(-- source-port/--sport和 --destination -port)
-i 或者-o 指定网络接口(PREROUTING链用-i POSTROUTING 用-o)
-s 指明源地址(--source/--src/源地址destination/--dst/目的地址)
-A 加入一个新规则到一个链(一般写到最后面)(append)
-I 在链内某个位置插入(insert)一般最后面
-R 在链内某个位置替换一条规则
-D 删除链内第一条规则(delete)
-d 指明目的地址
这样你的cs服务器就是外网ip:27015(其他的也可以)


_________________
代码: