# cat jserv.properties
######################################################################
#########
# Apache JServ Configuration File
#
######################################################################
#########
################################ W A R N I N G #######################
#########
# Unlike normal Java properties, JServ configurations have some import
ant
# extentions:
#
# 1) commas are used as token separators
# 2) multiple definitions of the same key are concatenated in a
# comma-separated list.
######################################################################
#########
#
# Execution parameters
#######################
# The Java Virtual Machine interpreter.
# Syntax: wrapper.bin=[filename] (String)
# Note: specify a full path if the interpreter is not visible in your
path.
wrapper.bin=/usr/local/jdk/bin/java
# Arguments passed to Java interpreter (optional)
# Syntax: wrapper.bin.parameters=[parameters] (String)
# Default: NONE
# Apache JServ entry point class (should not be changed)
# Syntax: wrapper.class=[classname] (String)
# Default: "org.apache.jserv.JServ"
# Arguments passed to main class after the properties filename (not us
ed)
# Syntax: wrapper.class.parameters=[parameters] (String)
# Default: NONE
# Note: currently not used
# PATH environment value passed to the JVM
# Syntax: wrapper.path=[path] (String)
# Default: "/bin:/usr/bin:/usr/local/bin" for Unix systems
# "c:\(windows-dir);c:\(windows-system-dir)" for Win32 system
s
# Notes: if more than one line is supplied these will be concatenated
using
# ":" or ";" (depending wether Unix or Win32) characters
# Under Win32 (windows-dir) and (windows-system-dir) will be
# automatically evaluated to match your system requirements
wrapper.path=/usr/bin:/usr/local/bin:/usr/local/jdk/bin:/usr/local/jsd
k/bin:/usr/local/jswdk/bin:/usr/local/jre/bin
# CLASSPATH environment value passed to the JVM
# Syntax: wrapper.classpath=[path] (String)
# Default: NONE (Sun's JDK/JRE already have a default classpath)
# Note: if more than one line is supplied these will be concatenated u
sing
# ":" or ";" (depending wether Unix or Win32) characters. JVM mu
st be
# able to find JSDK and JServ classes and any utility classes us
ed by
# your servlets.
# Note: the classes you want to be automatically reloaded upon modific
ation
# MUST NOT be in this classpath or the classpath of the shell
# you start the Apache from.
#
wrapper.classpath=/usr/local/apache/jserv/libexec/ApacheJServ.jar
wrapper.classpath=/usr/local/jsdk/lib/jsdk.jar
wrapper.classpath=/usr/local/jre/lib/rt.jar
wrapper.classpath=/usr/local/jdk/lib/tools.jar
wrapper.classpath=/usr/local/ojsp/lib/ojsp.jar
wrapper.classpath=/usr/local/jswdk/lib/servlet.jar
wrapper.classpath=/usr/local/ojsp/lib/xmlparsev2.jar
wrapper.classpath=/usr/local/ojsp/lib/translator.zip
# An environment name with value passed to the JVM
# Syntax: wrapper.env=[name]=[value] (String)
# Default: NONE on Unix Systems
# SystemDrive and SystemRoot with appropriate values on Win32
systems
# An environment name with value copied from caller to Java Virtual Ma
chine
# Syntax: wrapper.env.copy=[name] (String)
# Default: NONE
# Copies all environment from caller to Java Virtual Machine
# Syntax: wrapper.env.copyall=[true|false] (boolean)
# Default: false
# Protocol used for signal handling
# Syntax: wrapper.protocol=[name] (String)
# Default: ajpv12
#
# General parameters
######################
# Set the default IP address or hostname Apache JServ binds (or listen
s) to.
#
# If you have a machine with multiple IP addresses, this address
# will be the one used. If you set the value to localhost, it
# will be resolved to the IP address configured for the locahost
# on your system (generally this is 127.0.0.1). This feature is so
# that one can have multiple instances of Apache JServ listening on
# the same port number, but different IP addresses on the same machine
.
# Use bindaddress=* only if you know exactly what you are doing here,
# as it could let JServ wide open to the internet.
# You must understand that JServ has to answer only to Apache, and sho
uld not
# be reachable by nobody but mod_jserv. So localhost is usually a
# good option. The second best choice would be an internal network add
ress
# (protected by a firewall) if JServ is running on another machine tha
n Apache.
# Ask your network admin.
# "*" _may_ be used on boxes where some of the clients get connected u
sing
# "localhost"and others using another IP addr.
#
# Syntax: bindaddress=[ipaddress] or [localhost] or [*]
# Default: localhost
# bindaddress=i140.231.59.250
# Set the port Apache JServ listens to.
# Syntax: port=[1024,65535] (int)
# Default: 8007
port=8007
#
# Servlet Zones parameters
###########################
# List of servlet zones Apache JServ manages
# Syntax: zones=[servlet zone],[servlet zone]... (Comma separated list
of String)
# Default: NONE
zones=root
# Configuration file for each servlet zone (one per servlet zone)
# Syntax: [servlet zone name as on the zones list].properties=[full pa
th to configFile] (String)
# Default: NONE
# Note: if the file could not be opened, try using absolute paths.
root.properties=/usr/local/apache/jserv/etc/zone.properties
#
# Thread Pool parameters
#########################
# Enables or disables the use of the thread pool.
# Syntax: pool=[true|false] (boolean)
# Default: false
# WARNING: the pool has not been extensively tested and may generate d
eadlocks.
# For this reason, we advise against using this code in production env
ironments.
pool=false
# Indicates the number of idle threads that the pool may contain.
# Syntax: pool.capacity=(int)>0
# Default: 10
# NOTE: depending on your system load, this number should be low for c
ontantly
# loaded servers and should be increased depending on load bursts.
pool.capacity=10
# Indicates the pool controller that should be used to control the
# level of the recycled threads.
# Syntax: pool.controller=[full class of controller] (String)
# Default: org.apache.java.recycle.DefaultController
# NOTE: it is safe to leave this unchanged unless special recycle beha
vior
# is needed. Look at the "org.apache.java.recycle" package javadocs fo
r more
# info on other pool controllers and their behavior.
pool.controller=org.apache.java.recycle.DefaultController
#
# Security parameters
#####################
# Enable/disable the execution of org.apache.jserv.JServ as a servlet.
# Syntax: security.selfservlet=[true|false] (boolean)
# Default: false
security.selfservlet=true
# Set the maximum number of socket connections Apache JServ may handle
# simultaneously. Make sure your operating environment has enough file
# descriptors to allow this number.
# Syntax: security.maxConnections=(int)>1
# Default: 50
security.maxConnections=50
# Backlog setting for very fine performance tunning of JServ.
# Unless you are familiar to sockets leave this value commented out.
# security.backlog=5
# List of IP addresses allowed to connect to Apache JServ. This is a f
irst
# security filtering to reject possibly unsecure connections and avoid
the
# overhead of connection authentication.
#
# (please don't use the following one unless you know what you are doi
ng :
# security.allowedAddresses=DISABLED
# allows connections on JServ'port from entire internet.)
# You do need only to allow YOUR Apache to talk to JServ.
#
#
# Default: 127.0.0.1
# Syntax: security.allowedAddresses=[IP address],[IP Address]... (Comm
a separated list of IP addresses)
#security.allowedAddresses=127.0.0.1
# Enable/disable connection authentication.
# NOTE: unauthenticated connections are a little faster since authenti
cation
# handshake is not performed at connection creation.
# Syntax: security.authentication=[true,false] (boolean)
# Default: true
security.authentication=false
# Authentication secret key.
# The secret key is passed as a file that must be kept secure and must
# be exactly the same of those used by clients to authenticate themsel
ves.
# Syntax: security.secretKey=[secret key path and filename] (String)
# Default: NONE
# Note: if the file could not be opened, try using absolute paths.
#security.secretKey=/usr/local/apache/jserv/etc/jserv.secret.key
# Length of the randomly generated challenge string (in bytes) used to
# authenticate connections. 5 is the lowest possible choice to force a
safe
# level of security and reduce connection creation overhead.
# Syntax: security.challengeSize=(int)>5
# Default: 5
#security.challengeSize=5
#
# Logging parameters
####################
# Enable/disable Apache JServ logging.
# Syntax: log=[true,false] (boolean)
# Default: true
log=true
# Set the name of the trace/log file. To avoid possible confusion abo
ut
# the location of this file, an absolute pathname is recommended.
#
# On Unix, this file must have write permissions by the owner of the J
VM
# process. In other words, if you are running Apache JServ in manual m
ode
# and Apache is running as user nobody, then the file must have its
# permissions set so that that user can write to it.
# Syntax: log.file=[log path and filename] (String)
# Default: NONE
# Note: if the file could not be opened, try using absolute paths.
log.file=/usr/local/apache/log/jserv.log
# Enable the timestamp before the log message
# Syntax: log.timestamp=[true,false] (boolean)
# Default: true
log.timestamp=true
# Use the given string as a data format
# (see java.text.SimpleDateFormat for the list of options)
# Syntax: log.dateFormat=(String)
# Default: [dd/MM/yyyy HH:mm:ss:SSS zz]
log.dateFormat=[dd/MM/yyyy HH:mm:ss:SSS zz]
# WARNING: Default values are lousy, you probably want to tweak them a
nd
# report the results back to the development team.
# Syntax: log.queue.maxage = [milliseconds]
# Default: 5000
log.queue.maxage = 5000
# Syntax: log.queue.maxsize = [integer]
# Default: 1000
log.queue.maxsize = 1000
# Enable the timestamp before the log message
# Syntax: log.timestamp=[true,false] (boolean)
# Default: true
log.timestamp=true
# Use the given string as a data format
# (see java.text.SimpleDateFormat for the list of options)
# Syntax: log.dateFormat=(String)
# Default: [dd/MM/yyyy HH:mm:ss:SSS zz]
log.dateFormat=[dd/MM/yyyy HH:mm:ss:SSS zz]
# Syntax: log.queue.maxage = [milliseconds]
# Default: 5000
log.queue.maxage = 5000
# Syntax: log.queue.maxsize = [integer]
# Default: 1000
log.queue.maxsize = 1000
# Enable/disable logging the channel name
# Default: false
# log.channel=false
# Enable/disable channels, each logging different actions.
# Syntax: log.channel.[channel name]=[true,false] (boolean)
# Default: false
# Info channel - quite a lot of informational messages
# hopefully you don't need them under normal circumstances
# log.channel.info=true
# Servlets exception, i.e. exception caught during
# servlet.service() processing are monitored here
# you probably want to have this one switched on
log.channel.servletException=true
# JServ exception, caught internally in jserv
# we suggest to leave it on
log.channel.jservException=true
# Warning channel, it catches all the important
# messages that don't cause JServ to stop, leave it on
log.channel.warning=true
# Servlet log
# All messages logged by servlets. Probably you want
# this one to be switched on.
log.channel.servletLog=true
# Critical errors
# Messages produced by critical events causing jserv to stop
log.channel.critical=true
# Debug channel
# Only for internal debugging purposes
#&n